elead integrated DC charging pile

Jh8000z DC charging pile belongs to electric vehicle fast charging equipment, which 

adopts forced air cooling and heat dissipation, and can be installed in electric 

vehicle charging station, public parking lot, residential parking lot, large 

shopping mall parking lot and other places; The product integrates charging control

human-computer interaction, security protection, metering and billing, online 

detection and other functions, and can dynamically adjust the charging curve 

according to the real-time demand of BMS to improve the charging efficiency; 

Support communication modes such as can, RS485, Ethernet, WiFi or GPRS.

Product advantages: 

1. In the charging process, the charger dynamically adjusts the charging parameters 

according to the data provided by the electric vehicle battery management system, 

performs corresponding actions and completes the charging process.

2. The charger adopts charging mode 4 and connection mode C specified in Appendix 

B of GB / t18487.1-2015 to charge the electric vehicle, and the charging interface 

meets the provisions of GB / t20234.1-2015 and GB / t20234.3-2015.

3. The charger has control guidance function, and the control guidance circuit 

and control principle meet the provisions in Appendix B of GB / t18487.1-2015.

4. The charger has a can interface to communicate with the battery management 

system to obtain the charging parameters and charging real-time data of the 

battery management system. The communication protocol shall meet the 

provisions of GB / T 27930-2015.

5. The charger has the function of measuring the output electric energy of 

each charging interface. The electric energy measuring device meets the 

relevant requirements of national verification of measuring instruments.

The electric energy measuring device shall have RS485 interface, and the

communication protocol shall comply with the technical requirements

of DL / T 645-2007 communication protocol for multi-functional electric 

energy meter.

6. The safety requirements of jh8000z series charging pile shall meet 

the corresponding description and technical parameter requirements in 

Appendix B of GB / T 18487.1-2015.